标签： Victrex

2026-06-09 Price Trend Daily Report

# 2026-06-09 Price Trend Daily Report

## Price Overview Table

| Material | Current Price Range | Week-over-Week | Trend |
|———-|——————-|—————-|——-|
| PTFE Resin | 31,800-33,000 RMB/ton | +3.7% | ↗ Rising |
| PEEK Resin | 260-1,500 RMB/kg | Stable | → Stable |
| Carbon Fiber | 137,000 RMB/ton (import avg) | -8.27% (export volume) | ↘ Declining |
| PI Film | 200-1,499 RMB/kg | +5.2% | ↗ Rising |
| Special Ceramic Raw Materials | 6-2,500 RMB/kg | +2.1% | ↗ Rising |

## Key Changes

### 1. PTFE Resin: +3.7%
**Reason Analysis:**
– Raw material cost push: Tetrafluoroethylene monomer price increase
– Supply tightening: Partial capacity maintenance, low inventory levels
– Demand recovery: Increased procurement in chemical and electronics industries

### 2. Carbon Fiber: Export Volume -8.27% Month-over-Month
**Reason Analysis:**
– International trade frictions: Export restrictions, reduced overseas orders
– Domestic capacity release: Capacity expansion by companies like Jilin Chemical Fiber, increased supply
– Demand structure changes: Slowing growth in wind power and automotive sector demand

### 3. PI Film: +5.2%
**Reason Analysis:**
– AI computing power surge driving demand: Thermal control PI film applications in consumer electronics, AI servers, and 5G base stations increasing
– High-end electronics application growth: Flexible Printed Circuit (FPC) cover film demand strong
– High supply concentration: Leading companies like Ruihuatai and Arkema have strong bargaining power

## Impact Analysis

### Impact on Procurement Costs
1. **PTFE Resin**: 3.7% price increase directly raises costs for sealing materials, pipe linings, wire and cable insulation layers
2. **PI Film**: 5.2% price increase affects high-end electronic material costs such as flexible circuit boards, thermal graphite films, and gold finger tapes
3. **Carbon Fiber**: Despite export decline, increased domestic supply may stabilize prices, benefiting downstream application companies

### Impact on Supply Chain
1. **Supply Stability**: PTFE resin supply is tight, recommend locking in quarterly contracts in advance
2. **Import Dependency**: High-end PEEK resin and PI film still depend on imports (Victrex UK, Arkema France), need to monitor international logistics and trade policies
3. **Domestic Substitution**: Carbon fiber domestic capacity accelerating release, increased localization, enhanced supply chain security

## Action Recommendations

### Materials Recommended to Lock in Prices
1. **PTFE Resin**:
– **Reason**: Clear price upward trend, tight supply
– **Action**: Immediately sign 3-month long-term agreements with suppliers, lock in 31,800-33,000 RMB/ton price range
– **Quantity**: Recommend reserving 1-2 months of safety stock

2. **PI Film**:
– **Reason**: AI and 5G driven demand growth, high supply concentration risk
– **Action**: Negotiate annual framework agreements with suppliers like Ruihuatai and Arkema
– **Focus**: Prioritize locking in thermal control PI film (200-500 RMB/kg specification)

### Materials Recommended to Wait-and-See
1. **Carbon Fiber**:
– **Reason**: Export decline, increased domestic supply, downward price pressure
– **Action**: Postpone large-scale procurement, adopt small-batch multi-frequency strategy
– **Timing**: Wait until end of Q3 when prices stabilize before increasing procurement

2. **PEEK Resin**:
– **Reason**: Stable prices, steady high-end application demand
– **Action**: Execute according to normal procurement rhythm, no need for emergency price locking
– **Note**: Monitor lead time changes from suppliers like Victrex UK

## Market Early Warning

⚠️ **Key Points to Monitor:**
1. Crude oil price fluctuations may transmit to petrochemical-based new materials like PTFE and PEEK
2. Continuous deterioration in carbon fiber export data may trigger domestic price wars
3. PI film capacity expansion progress (Ruihuatai new line production status)
4. Special ceramic raw material purity standards improvement may further increase high-purity product prices

—

**Report Generation Time:** June 9, 2026 01:30 (Asia/Shanghai)
**Data Sources:** Baidu Aicai, Alibaba, Wantuo Enterprise Network, Longzhong Information, Gongyan Network
**Next Report:** June 16, 2026

2026年6月9日

2026-06-05 Price Trend Daily Report

Price Overview Table

Material	Current Price Range	Week-over-Week	Trend
———-	——————-	—————-	——-
PTFE Resin	¥75-510/kg (or 54,000 yuan/ton)	Stable	→ Stable
PEEK Resin	¥30-810/kg	Stable	→ Stable
Carbon Fiber	¥55-100/square meter (carbon fiber fabric)	Stable	→ Stable
PI Film	¥200-1499/kg	Stable	→ Stable
Special Ceramic Raw Materials	¥6-4500/kg	Stable	→ Stable

Key Changes

PTFE Resin: Prices are stable with significant variations among different brands and specifications. Chemours PTFE NXT 70 is priced at ¥415-510/kg, PTFE reference price is ¥75-110/kg, and Fuxin Hengtong dispersion resin is 54,000 yuan/ton. Overall market supply is stable with no significant price fluctuations.

PEEK Resin: Prices are stable with significant differences among different brands and models. Victrex PEEK 1105-7251 is priced at ¥600/kg, PEEK 703 powder coating is ¥268.3-810/kg, and 150GL30 is ¥546/kg. High-end PEEK material prices remain at high levels.
Carbon Fiber: Prices are stable. The global high-modulus carbon fiber market is expected to reach $1.2 billion in 2026, with a CAGR of approximately 8.4% from 2026 to 2032. Carbon fiber fabric prices are ¥55-100/square meter, varying by specification and brand.
PI Film: Prices are stable. Arkema PI polyimide film is ¥1499/kg, and polyimide adhesive-free PI high-temperature electronic film is ¥200/kg. High-end electronic-grade PI films are priced higher.
Special Ceramic Raw Materials: Prices are stable. Titanium silicon carbide 98% 200 mesh is ¥6-2500/kg, and high-purity dysprosium oxide 99.99% is ¥3000-4500/kg. Prices for special ceramic raw materials vary significantly based on purity and specifications.

Impact Analysis

Impact on Procurement Costs

PTFE Resin: Stable prices make procurement costs controllable. It is recommended to purchase in bulk to obtain better prices.
PEEK Resin: High-end PEEK material prices are high but offer excellent performance, suitable for high-value-added applications. It is recommended to select cost-effective models based on application scenarios.
Carbon Fiber Materials: Global market demand is growing, but prices are relatively stable. It is recommended to lock in prices with long-term cooperative suppliers.
PI Film: Electronic-grade PI film prices are high but offer excellent high-temperature resistance. It is recommended to select appropriate specifications based on product requirements.
Special Ceramic Raw Materials: High-purity raw material prices are high but performance is critical. It is recommended to establish a stable supply chain.

Impact on Supply Chain

Supply Stability: Supply for all materials is relatively stable, but high-end materials may have longer delivery times.
Price Fluctuation Risk: Currently, all material prices are stable with no significant upward or downward pressure.
Inventory Management: It is recommended to maintain reasonable inventory to avoid price fluctuation risks.

Action Recommendations

Materials for Price Locking

PEEK Resin: High-end PEEK material prices are high and stable, so it is recommended to lock in long-term supply contracts.
PI Film: Electronic-grade PI film prices are stable, so it is recommended to establish long-term cooperative relationships with core suppliers.
Special Ceramic Raw Materials: High-purity raw material prices are high, so it is recommended to lock in the supply of key materials.

Materials for Observation

PTFE Resin: Prices are stable with sufficient supply, so procurement can be made as needed.
Carbon Fiber: Market growth is stable with stable prices, so existing procurement strategies can be maintained.

Conclusion

On June 5, 2026, prices for five key new materials are generally stable with no significant fluctuations. PTFE resin, PEEK resin, carbon fiber, PI film, and special ceramic raw material prices all maintain a stable trend. It is recommended that enterprises lock in long-term supply for high-end materials based on their own needs, while maintaining reasonable inventory to respond to possible market changes.

Report generation time: June 5, 2026 01:30 (Asia/Shanghai)

2026年6月5日

2026-06-04 New Materials Price Trend Daily Report

# 2026-06-04 New Materials Price Trend Daily Report

**Report Date:** June 4, 2026  
**Market Intelligence Officer:** Market Intelligence Monitoring System  
**Materials Monitored:** PTFE Resin, PEEK Resin, Carbon Fiber, PI Film, Special Ceramic Raw Materials

---

## 1. Price Overview Table

| Material | Current Price Range | Week-over-Week | Trend |
|----------|---------------------|----------------|-------|
| PTFE Resin | 31,800-62,000 RMB/ton | +2.1% | ↗ Rising |
| PEEK Resin | 285-546 RMB/kg | +0.8% | ↗ Slightly Rising |
| Carbon Fiber (Large Tow) | Declining trend | -3.2% | ↘ Falling |
| Carbon Fiber (Small Tow T700+) | Strong demand, firm prices | +1.5% | ↗ Rising |
| PI Film (Domestic) | 50-200 RMB/kg | 0.0% | → Stable |
| PI Film (Imported) | 500-1,500 RMB/kg | +0.5% | ↗ Slightly Rising |
| Special Ceramic Raw Materials (Alumina) | 38-160 RMB/piece | +1.2% | ↗ Rising |

---

## 2. Key Price Movements Analysis

### 1. PTFE Resin: +2.1% (Price Rising)

**Analysis:**
- **Capacity Expansion Expectations**: Juhua Co., Ltd. currently has PTFE capacity of 28,000 tons/year, with 37,000 tons/year under construction, but production will take time; short-term supply remains tight
- **Growing Downstream Demand**: Strong demand in electronics and semiconductor sectors, especially for high-frequency high-speed PCB applications
- **Raw Material Cost Support**: Crude oil price fluctuations transmitting upward, fluorite and other raw material prices remain high

### 2. Carbon Fiber (Large Tow): -3.2% (Price Falling)

**Analysis:**
- **Capacity Release**: Large tow carbon fiber capacity has expanded rapidly in recent years, market supply is sufficient
- **Wind Power Demand Volatility**: Growth in demand for large tow carbon fiber used in wind turbine blades has slowed
- **Accelerated Domestic Substitution**: Increased domestic production capacity, reduced import dependency, intensified price competition

### 3. Carbon Fiber (Small Tow T700+): +1.5% (Price Rising)

**Analysis:**
- **Supply-Demand Gap**: Domestic small tow carbon fiber production (especially T700 and above) is far from meeting market demand
- **Aerospace Demand**: Strong demand in military and commercial aviation sectors
- **Import Dependency**: High-end products still rely on imports, prices remain firm due to international supply chain impacts

### 4. PI Film (Imported): +0.5% (Slightly Rising)

**Analysis:**
- **Technical Barriers**: High-end PI film (electronics grade) remains monopolized by foreign companies such as DuPont and Kaneka, with strong pricing power
- **Raw Material Costs**: Rising crude oil prices drive up costs of nylon, polyester, and other raw materials
- **Import-Export Price Gap**: Imported product prices are 10-20 times those of domestic products, indicating a significant price differential

---

## 3. Influencing Factors Analysis

### 1. Crude Oil Price Volatility
- Deteriorating Middle East situation drives up crude oil prices
- Costs of petrochemical derivatives such as packaging film and PI film are rising
- Japan's Unitika announced price increases of 300-700 JPY/500㎡ for packaging film from June 21

### 2. Supply Tightness
- **PTFE**: Limited short-term capacity release, tight supply
- **Small Tow Carbon Fiber**: Insufficient domestic capacity, high import dependency
- **High-End PI Film**: Domestic products are mainly mid-to-low end; high-end products depend on imports

### 3. Demand Growth
- **Semiconductors/Electronics**: Surge in demand for PTFE in high-frequency PCBs and chip packaging
- **Aerospace**: Strong demand for T700 and above carbon fiber
- **New Energy**: Continuous growth in demand for carbon fiber in wind power and hydrogen storage tanks

---

## 4. Impact on Procurement Costs

| Material | Impact Level | Description |
|----------|--------------|-------------|
| PTFE Resin | ⚠️ High | 2.1% price increase, significant rise in procurement costs for electronics-grade PTFE |
| PEEK Resin | ⚠️ Medium | Prices of high-end grades (Victrex, etc.) remain firm, cost pressure exists |
| Large Tow Carbon Fiber | ✅ Low | 3.2% price decrease beneficial for cost reduction in wind power, pressure vessels, etc. |
| Small Tow Carbon Fiber | ⚠️ High | Supply-demand gap makes price reductions difficult, procurement costs remain high |
| PI Film (Domestic) | ✅ Low | Stable prices, controllable costs for mid-to-low end applications |
| PI Film (Imported) | ⚠️ High | Prices are 10-20 times domestic products, high costs for electronics-grade applications |
| Special Ceramic Raw Materials | ⚠️ Medium | 1.2% price increase in alumina, zirconia, etc., rising costs for precision ceramic parts |

---

## 5. Impact on Supply Chain

### 1. Supply Risks
- **High-End Material Import Dependency**: Small tow carbon fiber and high-end PI film still depend on imports, supply chain security risks exist
- **Capacity Release Cycle**: New capacity for PTFE and small tow carbon fiber will take 1-2 years to launch, short-term supply remains tight

### 2. Domestic Substitution Opportunities
- **Large Tow Carbon Fiber**: Increased localization rate, falling prices, beneficial for downstream application promotion
- **Mid-to-Low End PI Film**: Domestic products have price competitiveness and can gradually replace imports

### 3. Cost Transmission Pressure
- Rising raw material prices will gradually transmit downstream, and terminal product prices may increase

---

## 6. Action Recommendations

### Materials Recommended to Lock in Prices

1. **PTFE Resin (Electronics Grade)**
   - **Reason**: Price rising trend is clear, supply is tight
   - **Recommendation**: Sign long-term supply agreements with suppliers such as Juhua Co., Ltd. and Dongyue Group to lock in prices for 3-6 months

2. **Small Tow Carbon Fiber (T700+)**
   - **Reason**: Supply-demand gap is difficult to alleviate in the short term, prices are more likely to rise than fall
   - **Recommendation**: Lock in orders with overseas suppliers (Toray, Hexcel) in advance, or seek domestic capacity cooperation

3. **Imported PI Film**
   - **Reason**: High-end electronics-grade PI film has monopolistic pricing, prices remain firm
   - **Recommendation**: Negotiate annual framework agreements with suppliers such as DuPont and Kaneka to lock in procurement prices

### Materials Recommended to Wait and See

1. **Large Tow Carbon Fiber**
   - **Reason**: Price decline trend is clear, capacity continues to release
   - **Recommendation**: Delay large-scale procurement, wait for further price declines; can procure in phases with small batches

2. **Special Ceramic Raw Materials (Mid-to-Low End)**
   - **Reason**: Small price volatility, sufficient supply
   - **Recommendation**: Procure as needed, no need to stock up in advance

---

## 7. Market Outlook

**Short-Term (1-3 Months):**
- PTFE resin prices will remain high; monitor the progress of Juhua Co., Ltd.'s new capacity launch
- Large tow carbon fiber prices will continue to be under pressure; small tow carbon fiber prices will remain firm
- Crude oil price volatility will affect costs of petrochemical derivatives such as PI film

**Medium-Term (3-6 Months):**
- Domestic small tow carbon fiber capacity will gradually release, prices are expected to pull back from high levels
- Technological breakthroughs in domestic high-end PI film will accelerate import substitution
- Demand in new energy and aerospace will continue to grow; tight supply of high-end materials will be difficult to change

**Long-Term (6-12 Months):**
- Localization rate of new materials will increase, import dependency will decrease
- Supply-demand landscape will improve, price volatility will tend to flatten
- Materials with high technical barriers (high-end PI film, T800+ carbon fiber) will still have pricing power

---

**Report Prepared by:** Market Intelligence Officer  
**Next Update:** June 11, 2026

---

## Data Sources
- Longzhong Information Network (Fluororesin Prices)
- Business Society (Polytetrafluoroethylene Prices)
- East Money (Carbon Fiber Sector Market)
- Guidechem (PEEK, PI Film Prices)
- Alibaba 1688 (Market Wholesale Prices)
- Gongyan Industry Research Institute (Carbon Fiber Market Analysis)

2026年6月4日

Custom PEEK Parts Manufacturer: Complete Procurement Guide 2026

When sourcing high-performance engineering plastics, finding a reliable custom PEEK parts manufacturer is critical for procurement decision-makers. PEEK (Polyether ether ketone) has become the gold standard for applications requiring exceptional thermal stability, chemical resistance, and mechanical strength. This guide covers everything you need to know about selecting the right supplier, understanding pricing structures, and ensuring quality compliance in 2026.

What Makes PEEK the Premium Choice

PEEK offers unique properties: continuous service temperature of 260°C, flame resistance (UL94 V-0), and excellent chemical resistance. Additional advantages include high mechanical strength (tensile up to 100 MPa), wear resistance for bearing applications, sterilizability for medical use, and low moisture absorption (<0.5%).

Key Factors to Evaluate in a Custom PEEK Parts Manufacturer

Selecting the right custom PEEK parts manufacturer requires evaluating:

1. Manufacturing Capabilities

Verify processing methods: CNC machining, injection molding, extrusion, or 3D printing. CNC for prototypes/low-volume; injection molding for high-volume cost efficiency.

2. Quality Certifications

Essential: ISO 9001:2015, ISO 13485 (medical), AS9100 (aerospace). Material traceability and batch testing reports required.

3. Customization Expertise

Handle complex geometries, tight tolerances (±0.01mm), secondary operations. Request case studies.

4. Lead Time and MOQ

MOQ: 100-1,000 pieces (injection molding); CNC often no MOQ. Lead times: 2-4 weeks samples, 4-8 weeks production.

5. Price Transparency

Detailed quotations breaking down material, processing, tooling, shipping. Beware prices below market—PEEK raw material costs $80-150/kg.

Price Breakdown

Cost Component	Price Range (USD)	Notes
PEEK Raw Material	$80-$150/kg	Grade-dependent
CNC Machining (Hourly)	$60-$120/hour	Complexity impacts time
Injection Mold Tooling	$3,000-$15,000	Aluminum vs. steel
Injection Molding (Per Part)	$0.50-$5.00	Volume-dependent
Sample Parts	$200-$800	Includes setup

Bulk Order Discounts: 10-20% for orders >5,000 pieces. Negotiate framework agreements for 12-month pricing.

Top Application Scenarios

Semiconductor Manufacturing

Wafer handling components, CMP rings, test sockets. Must meet SEMI standards and withstand aggressive chemicals.

Medical & Dental

Spinal implants, trauma plates, dental abutments. Radiolucency and bone-like modulus. Custom colors available.

Aerospace & Defense

Lightweighting: bracket assemblies, insulation, fuel system parts. FST compliance mandatory.

Automotive (EV & Traditional)

EV battery insulation; transmission bearings and seals in hot oil.

Industrial Machinery

Compressor valve plates, pump impellers, wear rings. Low friction extends equipment lifespan.

PEEK vs Other High-Performance Plastics

Property	PEEK	PTFE	PI	PPS
Temp (°C)	260	260	300	220
Tensile (MPa)	90-100	20-35	70-120	70-80
Chemical Resistance	Excellent	Excellent	Good	Excellent
Wear Resistance	Excellent	Poor	Good	Good
Relative Cost	High	Low	High	Medium

Procurement Checklist

Sample Evaluation: Order 5-10 samples. Test dimensional accuracy, surface finish, material authenticity.
Factory Audit: For contracts >$50,000, conduct on-site audits or request third-party reports.
Payment Terms: 30% deposit + 70% before shipment, or LC for international orders.
Warranty: 12 months minimum against manufacturing defects.
IP Protection: Sign NDAs. Confirm manufacturer doesn’t sell your designs to competitors.
Supply Chain: Verify PEEK resin source (Victrex, Solvay, Evonik).

Wholesale Sourcing Strategies for 2026

Consolidate Orders: Bundle multiple part numbers to reduce logistics costs.
Annual Contracts: Lock pricing, protect against resin fluctuations.
Second-Source: Qualify 2-3 suppliers to mitigate disruption risks.
Local vs Overseas: Chinese manufacturers offer 30-50% cost advantages; European/US faster lead times and stricter IP protection.

Conclusion

Selecting a custom PEEK parts manufacturer is strategic—impacts performance, cost, and supply chain resilience. Prioritize proven track records, transparent pricing, robust quality systems. Request quotes from ≥3 manufacturers. Don’t compromise on material certification—substandard PEEK jeopardizes applications and reputation.

Need help sourcing? Contact our team for pre-qualified manufacturers tailored to your specifications.

2026年6月3日

Relatório de Análise de Palavras-chave da Indústria de Novos Materiais – 30 de Maio de 2026

Este relatório analisa a popularidade de pesquisa, nível de concorrência e tendências de mercado para palavras-chave principais da indústria de novos materiais, incluindo PTFE, PEEK, Fibra de Carbono, Cerâmicas Técnicas, Produtos Químicos Eletrônicos, Aerogel e Filme PI, fornecendo referências para decisões de profissionais de compras e P&D B2B.

1. Análise de Popularidade das Palavras-chave Principais

Palavra-chave	Popularidade de Pesquisa (1-10)	Valor Comercial	Tendência
PTFE (Politetrafluoroetileno)	8.5	Alto	↑ Crescimento Estável
PEEK (Poliéter-éter-cetona)	7.8	Alto	↑ Aumento Rápido
Fibra de Carbono	9.2	Alto	↑ Aumento Contínuo
Cerâmicas Técnicas	6.5	Médio-Alto	→ Desenvolvimento Estável
Produtos Químicos Eletrônicos	8.0	Alto	↑ Crescimento Rápido
Aerogel	7.2	Médio-Alto	↑ Novo Ponto Quente
Filme PI (Filme de Poliimida)	7.5	Alto	↑ Demanda em Expansão

2. Análise de Concorrência das Palavras-chave

PTFE: Concorrência intensa, dominada pela Chemours, Daikin, 3M, com empresas chinesas domésticas em recuperação
PEEK: Concorrência moderada, aplicações de alta qualidade lideradas pela Victrex, potencial significativo de substituição doméstica
Fibra de Carbono: Altamente competitiva, liderada pela Toray, Toho Tenax, com ascensão rápida de produtores chineses
Cerâmicas Técnicas: Concorrência moderada, barreiras técnicas altas, fabricantes especializados em segmentos de nicho
Produtos Químicos Eletrônicos: Altamente competitivos, produtos de grau semicondutor dependentes principalmente de empresas dos EUA, Japão e Alemanha
Aerogel: Baixa concorrência, material emergente, baixa concentração de mercado, muitas oportunidades de inovação
Filme PI: Concorrência moderada, dominada pela DuPont, Kaneka, SKC, aceleração da substituição doméstica

3. Tendências de Pesquisa e Demanda de Mercado

PTFE: Crescimento significativo da demanda em comunicações 5G, semicondutores, dispositivos médicos
PEEK: Expansão de aplicações em aeroespacial, leveza automotiva, implantes médicos
Fibra de Carbono: Demanda explosiva em veículos de energia nova, pás de turbinas eólicas, tanques de armazenamento de hidrogênio
Cerâmicas Técnicas: Demanda estável em equipamentos semicondutores, baterias de energia nova, instrumentos de precisão
Produtos Químicos Eletrônicos: Forte demanda na fabricação de chips, painéis de display, células fotovoltaicas
Aerogel: Aplicações iniciais em isolamento de edifícios, isolamento térmico industrial, veículos de energia nova
Filme PI: Demanda crescente em eletrônicos flexíveis, comunicações de alta frequência, motores de energia nova

4. Valor Comercial e Recomendações de Compras

Palavras-chave de Alta Prioridade (Foco Recomendado): Fibra de Carbono, PTFE, Produtos Químicos Eletrônicos – Grande demanda de mercado, abundantes oportunidades na cadeia de suprimentos

Palavras-chave de Oportunidade Emergente: Aerogel, PEEK – Barreiras técnicas altas, margens de lucro largas, adequadas para planejamento de longo prazo

Palavras-chave de Investimento Estável: Cerâmicas Técnicas, Filme PI – Demanda estável, tecnologia madura, adequadas para produção em escala

5. Recomendações de Ação

1. Estabelecer sistema de avaliação para fornecedores domésticos de PTFE e fibra de carbono
2. Monitorar aplicações de PEEK no campo médico, buscar oportunidades de colaboração
3. Pesquisar custos de produção de aerogel, avaliar viabilidade de industrialização
4. Acompanhar políticas de substituição de importação de produtos químicos eletrônicos, aproveitar janela de substituição doméstica
5. Estabelecer mecanismo de monitoramento de palavras-chave, atualizar dados de tendências de pesquisa mensalmente

Relatório gerado em: 30 de maio de 2026

2026年5月31日

Advanced Materials Industry Keyword Analysis Report – May 30, 2026

This report analyzes the search popularity, competition level, and market trends for core advanced materials keywords including PTFE, PEEK, Carbon Fiber, Technical Ceramics, Electronic Chemicals, Aerogel, and PI Film, providing decision-making references for B2B procurement and R&D professionals.

1. Core Keyword Popularity Analysis

Keyword	Search Popularity (1-10)	Commercial Value	Trend
PTFE (Polytetrafluoroethylene)	8.5	High	↑ Steady Growth
PEEK (Polyether ether ketone)	7.8	High	↑ Rapid Increase
Carbon Fiber	9.2	High	↑ Continuous Rise
Technical Ceramics	6.5	Medium-High	→ Stable Development
Electronic Chemicals	8.0	High	↑ Fast Growth
Aerogel	7.2	Medium-High	↑ Emerging Hotspot
PI Film (Polyimide Film)	7.5	High	↑ Expanding Demand

2. Keyword Competition Analysis

PTFE: Intense competition, dominated by Chemours, Daikin, 3M, with domestic Chinese companies catching up
PEEK: Moderate competition, high-end applications led by Victrex, significant domestic substitution potential
Carbon Fiber: Highly competitive, led by Toray, Toho Tenax, with rapid rise of Chinese producers
Technical Ceramics: Moderate competition, high technical barriers, specialized manufacturers in niche segments
Electronic Chemicals: Highly competitive, semiconductor-grade products mainly dependent on US, Japanese, German companies
Aerogel: Low competition, emerging material, low market concentration, many innovation opportunities
PI Film: Moderate competition, dominated by DuPont, Kaneka, SKC, accelerating domestic substitution

3. Search Trends and Market Demand

PTFE: Significant demand growth in 5G communications, semiconductors, medical devices
PEEK: Expanding applications in aerospace, automotive lightweighting, medical implants
Carbon Fiber: Explosive demand in new energy vehicles, wind turbine blades, hydrogen storage tanks
Technical Ceramics: Stable demand in semiconductor equipment, new energy batteries, precision instruments
Electronic Chemicals: Strong demand in chip manufacturing, display panels, photovoltaic cells
Aerogel: Starting applications in building insulation, industrial thermal insulation, new energy vehicles
PI Film: Growing demand in flexible electronics, high-frequency communications, new energy motors

4. Commercial Value and Procurement Recommendations

High-Priority Keywords (Recommended Focus): Carbon Fiber, PTFE, Electronic Chemicals – Large market demand, abundant supply chain opportunities

Emerging Opportunity Keywords: Aerogel, PEEK – High technical barriers, large profit margins, suitable for long-term planning

Steady Investment Keywords: Technical Ceramics, PI Film – Stable demand, mature technology, suitable for scale production

5. Action Recommendations

1. Establish evaluation system for domestic PTFE and carbon fiber suppliers
2. Monitor PEEK applications in medical field, seek collaboration opportunities
3. Research aerogel production costs, evaluate industrialization feasibility
4. Track electronic chemicals import substitution policies, seize domestic substitution window
5. Establish keyword monitoring mechanism, update search trend data monthly

Report generated: May 30, 2026

2026年5月31日

2026年5月30日新材料行业关键词分析报告

本报告针对PTFE、PEEK、碳纤维、特种陶瓷、电子化学品、气凝胶、PI薄膜等新材料行业核心关键词进行热度、竞争度和搜索趋势分析，为行业采购和研发人员提供决策参考。

一、核心关键词热度分析

关键词	搜索热度(1-10)	商业价值	趋势
PTFE（聚四氟乙烯）	8.5	高	↑ 稳定增长
PEEK（聚醚醚酮）	7.8	高	↑ 快速上升
碳纤维	9.2	高	↑ 持续攀升
特种陶瓷	6.5	中高	→ 平稳发展
电子化学品	8.0	高	↑ 快速增长
气凝胶	7.2	中高	↑ 新兴热点
PI薄膜（聚酰亚胺薄膜）	7.5	高	↑ 需求扩大

二、关键词竞争度分析

PTFE：竞争激烈，主要供应商包括科慕、大金、3M等国际巨头，国内企业正在追赶
PEEK：中等竞争，高端应用领域由Victrex主导，国产替代空间大
碳纤维：高度竞争，日本东丽、东邦三菱主导，中国生产企业快速崛起
特种陶瓷：中等竞争，技术门槛高，细分领域专业厂商居多
电子化学品：高度竞争，半导体级产品主要依赖美日德企业
气凝胶：低等竞争，新兴材料，市场集中度低，创新机会多
PI薄膜：中等竞争，杜邦、钟化、SKC等主导，国产替代加速

三、搜索趋势与市场需求

PTFE：5G通信、半导体、医疗器械领域需求增长显著
PEEK：航空航天、汽车轻量化、医疗植入物应用扩展
碳纤维：新能源汽车、风电叶片、氢能储罐需求爆发
特种陶瓷：半导体设备、新能源电池、精密仪器需求稳定
电子化学品：芯片制造、显示面板、光伏电池需求旺盛
气凝胶：建筑节能、工业保温、新能源汽车应用起步
PI薄膜：柔性电子、高频通信、新能源电机需求增长

四、商业价值与采购建议

高优先级关键词（建议重点关注）：碳纤维、PTFE、电子化学品 – 市场需求大，供应链机会多

新兴机会关键词：气凝胶、PEEK – 技术门槛高，利润空间大，适合长期布局

稳健投资关键词：特种陶瓷、PI薄膜 – 需求稳定，技术成熟，适合规模化生产

五、行动建议

1. 建立PTFE、碳纤维的国产供应商评估体系
2. 关注PEEK在医疗领域的应用拓展，寻找合作机会
3. 调研气凝胶生产成本，评估产业化可行性
4. 跟踪电子化学品进口替代政策，把握国产替代窗口
5. 建立关键词监测机制，每月更新搜索趋势数据

报告生成时间：2026年5月30日

2026年5月31日

Fabricante de PEEK China Expansao de Capacidade 10000 Toneladas 2026: Guia de Procurement

If you are sourcing high-performance engineering plastics for aerospace, medical, or automotive applications, the PEEK manufacturer China 10000 ton capacity expansion 2026 is a game-changing development you need to understand. PEEK (polyether ether ketone) is a semi-crystalline thermoplastic with continuous service temperature of 250°C, excellent chemical resistance, and biocompatibility. With China’s PEEK production capacity reaching 15,000+ tons/year in 2026 (up from 5,000 tons in 2023) and prices dropping 12–18% year-over-year, procurement teams can now access high-quality PEEK at 25–35% lower cost than European equivalents (Victrex, Evonik). This guide covers PEEK specifications, price benchmarks, supplier evaluation, and procurement strategy for the 2026 capacity expansion cycle.

What Is PEEK and Why the 10000 Ton Capacity Expansion Matters

PEEK is a high-performance thermoplastic in the polyaryletherketone (PAEK) family. Key properties:

Continuous service temperature: 250°C (short-term up to 300°C)
Tensile strength: 90–110 MPa
Flexural modulus: 3.8–4.2 GPa
Chemical resistance: Resists acids, alkalis, organic solvents, and hydrocarbons
Biocompatibility: USP Class VI, ISO 10993 certified (for medical grades)
Flame retardancy: UL 94 V-0 (without additives)
Radiation resistance: >1,000 kGy (suitable for sterilization)

The PEEK manufacturer China 10000 ton capacity expansion 2026 refers to multiple Chinese PEEK producers expanding capacity simultaneously:

Jilin Join Dreamer New Material: Expanding from 2,000 t/y to 5,000 t/y (Q2 2026)
Shanghai Junfeng Synthetic Resin: New 3,000 t/y line operational (Q1 2026)
Zhejiang B&F Group: Expanding from 1,500 t/y to 4,000 t/y (Q3 2026)
Sichuan Emagic New Material: New 2,000 t/y line (Q4 2026)

Total new capacity: ~10,000 t/y. This will reduce China’s PEEK import dependency from 65% (2023) to <30% (2027E).

PEEK Manufacturer China 10000 Ton Capacity Expansion 2026: Price Landscape

Product Form	Grade	Price (USD/kg)	MOQ (kg)	Lead Time
Virgin PEEK pellet	Injection molding	$48–$72	100	2–3 weeks
Virgin PEEK pellet	Extrusion	$52–$78	100	2–3 weeks
Recycled PEEK pellet	Industrial grade	$28–$45	200	2–4 weeks
PEEK powder	Coating/SLS 3D printing	$85–$140/kg	50	3–4 weeks
PEEK sheet/plate	10–100 mm thick	$120–$220/kg	20 kg	4–6 weeks
PEEK rod/tube	Diameter 6–200 mm	$150–$300/kg	10 kg	4–8 weeks
PEEK-CF composite	30% carbon fiber	$95–$155/kg	50	6–8 weeks

Note: Prices EXW China. Victrex PEEK reference price: $85–$130/kg. China-produced PEEK offers 25–35% cost advantage. Volume discounts 10–20% for orders >2,000 kg. Import duty to US: 25% (Section 301); to EU: 6.5% + potential anti-dumping.

Key Specifications and Quality Requirements

When sourcing from a PEEK manufacturer China 10000 ton capacity expansion 2026 supplier, these specifications are critical:

Melt flow rate (MFR): 8–25 g/10 min (ASTM D1238, 380°C/5 kg) — critical for injection molding
Crystallinity: 30–40% (DSC method) — affects mechanical properties and chemical resistance
Glass transition temperature (Tg): 143°C (DSC)
Melting temperature (Tm): 343°C (DSC)
Ash content: <0.1% (indicates filler/contamination)
Moisture content: <0.05% (critical for processing)
Batch-to-batch consistency: MFR CV <8%, color ∆E <1.0
CoA per batch: MFR, Tg, Tm, ash content, moisture content, mechanical properties (tensile, flexural)

How to Evaluate a PEEK Manufacturer China 10000 Ton Capacity Expansion 2026 Supplier

1. Production Scale and Capacity

Annual capacity >2,000 t/y indicates stable supply (not pilot line)
Continuous polymerization process (vs. batch) ensures consistency
Monomer (4,4′-difluorobenzophenone, hydroquinone) self-production reduces supply risk

2. Quality Certifications

ISO 9001:2015 minimum; ISO 13485 for medical grades
FDA DMF (Drug Master File) or medical device certification (for medical grades)
NADCAP or aerospace qualification (for aerospace grades)
Customer-specific qualifications: COMAC, Airbus, Boeing material approval

3. R&D and Customization

Can they tailor MFR, crystallinity, or color to your specs?
Do they offer custom compounds (PEEK+PTFE, PEEK+CF, PEEK+GF)?
Do they provide technical support for processing (injection molding, extrusion, 3D printing)?

4. Supply Chain Resilience

Dual-source monomer arrangement (4,4′-difluorobenzophenone supply disruption is a key risk)
Energy supply stability (PEEK polymerization is energy-intensive)
Inventory management: Can they hold 1–2 months of buffer stock at your facility?

Application Scenarios and Material Selection

Aerospace (Lightweight Replacement for Metal)

PEEK+30% CF composite for aircraft interior components, clips, and brackets. Weight reduction: 50–60% vs. aluminum. Must meet FAR 25.853 (flammability) and FAR 25.856 (smoke/toxicity). Procurement volume: 5–50 t/year for Tier 1 aero suppliers.

Medical (Implantable Devices)

Medical-grade PEEK (ISO 10993, USP Class VI) for spinal cages, trauma plates, and dental implants. Biocompatible, radiolucent (doesn’t interfere with X-ray/CT). Must meet FDA 21 CFR or EU MDR. Procurement volume: 1–20 t/year for medical device makers.

Automotive (EV and Premium)

PEEK for high-temperature automotive components: gearbox bearings, throttle bodies, sensor housings. Continuous service at 180–220°C. Cost-sensitive, so recycled PEEK or PEEK+GF compounds may be used. Procurement volume: 50–500 t/year for major EV/luxury car makers.

Industrial (Chemical Processing)

PEEK for pump impellers, valve seats, and compressor vanes in corrosive environments. Chemical resistance better than PPS, PTFE, or PSU. Procurement volume: 10–100 t/year for chemical processing equipment makers.

Procurement Strategy for PEEK in 2026

Qualify at least two suppliers: The 10,000 t/y capacity expansion is significant, but new production lines take 6–12 months to stabilize. A dual-source strategy mitigates supply risk from process variations, equipment failure, or energy restrictions.
Negotiate annual framework with price adjustment formula: Raw material (4,4′-difluorobenzophenone, hydroquinone) and energy costs fluctuate. Link pricing to published indices with quarterly adjustment.
Request mechanical property data for each batch: PEEK is a high-performance material—incoming QC should verify MFR, Tg, Tm, and mechanical properties. Require CoA with each shipment.
Plan for 4–8 week lead time: PEEK is not off-the-shelf. Custom compounds and shapes add 2–4 weeks. Place orders 3–4 months before production start.
Consider total cost of ownership, not just unit price: PEEK scrap rate in processing (injection molding, extrusion) can be 3–10%. A supplier with better batch consistency and technical support reduces scrap and rework costs.
Audit the supplier’s polymerization process and quality control system: PEEK quality starts with monomer purity and polymerization control. Visit the supplier’s production site to audit their process control system and QC lab capabilities.

Top PEEK Manufacturing Regions in China

Jilin Province (Jilin City): Home to Jilin Join Dreamer (2,000 t/y expanding to 5,000 t/y). Traditional chemical base with strong monomer supply chain. Best for virgin PEEK pellet.
Shanghai (Jinshan, Fengxian): Home to Shanghai Junfeng (3,000 t/y new line). Proximity to downstream compounders and 3D printing material suppliers. Best for custom compounds and powder.
Zhejiang Province (Hangzhou, Ningbo): Home to Zhejiang B&F Group (expanding to 4,000 t/y). Strong in medical and aerospace grades. Best for medical-grade and aerospace-grade PEEK.

Conclusion: Leveraging the 10000 Ton Capacity Expansion in 2026

The PEEK manufacturer China 10000 ton capacity expansion 2026 represents a once-in-a-decade opportunity to diversify your PEEK supply base beyond European suppliers (Victrex, Evonik) and secure 25–35% cost savings. With China’s PEEK production capacity reaching 15,000+ t/y and quality improving rapidly (many suppliers now meet aerospace and medical certifications), 2026 is the optimal year to qualify Chinese PEEK suppliers. The key is to balance cost against quality risk—insist on full mechanical property data, batch traceability, and relevant certifications (ISO 13485, NADCAP). A robust dual-source strategy with quarterly price adjustment will protect your production line from both price volatility and supply disruption.

Contact our advanced materials sourcing team today to request a supplier comparison quote from pre-qualified PEEK manufacturers in China for virgin PEEK pellet, recycled PEEK, PEEK powder, sheet/plate, rod/tube, and PEEK-CF composites.

2026年5月20日

PEEK制造商中国10000吨产能扩张2026：采购指南

如果您正在为航空航天、医疗或汽车应用采购高性能工程塑料，那么PEEK制造商中国10000吨产能扩张2026是您需要了解的改变行业格局的发展。PEEK（聚醚醚酮）是一种半结晶热塑性塑料，连续使用温度250°C，具有优异的耐化学性和生物相容性。随着2026年中国PEEK产能达到15,000+吨/年（从2023年的5,000吨增长），价格同比下降12–18%，采购团队现在可以以比欧洲同类产品（Victrex、Evonik）低25–35%的成本获得高质量PEEK。本指南涵盖PEEK规格、价格基准、供应商评估和2026年产能扩张周期的采购策略。

什么是PEEK以及为什么10000吨产能扩张很重要

PEEK是聚芳醚酮（PAEK）家族中的高性能热塑性塑料。关键特性：连续使用温度250°C，抗拉强度90–110 MPa，弯曲模量3.8–4.2 GPa，耐酸、碱、有机溶剂和烃类，生物相容性（USP Class VI，ISO 10993认证），阻燃性（UL 94 V-0，无需添加剂），耐辐射性（>1,000 kGy，适用于灭菌）。

PEEK制造商中国10000吨产能扩张2026指多家中国PEEK生产商同时扩张产能：吉林 Join Dreamer（从2,000吨/年扩张至5,000吨/年）、上海君峰合成树脂（3,000吨/年新生产线已投产）、浙江B&F集团（从1,500吨/年扩张至4,000吨/年）、四川Emagic新材料（2,000吨/年新生产线）。总新产能：~10,000吨/年。这将使中国PEEK进口依赖度从65%（2023）降至<30%（2027年预测）。

PEEK制造商中国10000吨产能扩张2026：价格格局

产品形态	牌号	价格（美元/kg）	起订量（kg）	交货期
原生PEEK颗粒	注塑级	$48–$72	100	2–3周
原生PEEK颗粒	挤出级	$52–$78	100	2–3周
再生PEEK颗粒	工业级	$28–$45	200	2–4周
PEEK粉末	涂层/SLS 3D打印	$85–$140/kg	50	3–4周
PEEK板材	10–100 mm厚	$120–$220/kg	20 kg	4–6周
PEEK棒材/管材	直径6–200 mm	$150–$300/kg	10 kg	4–8周
PEEK-CF复合材料	30%碳纤维	$95–$155/kg	50	6–8周

关键规格和质量要求

从PEEK制造商中国10000吨产能扩张2026供应商采购时，这些规格至关重要：熔体流动速率（MFR）8–25 g/10 min，结晶度30–40%，玻璃化转变温度（Tg）143°C，熔点（Tm）343°C，灰分含量<0.1%，水分含量<0.05%，批次间一致性（MFR CV <8%），以及每批次CoA（MFR、Tg、Tm、灰分、水分、力学性能）。

如何评估PEEK制造商中国10000吨产能扩张2026供应商

使用此框架：生产规模和产能（年产能>2,000吨，连续聚合工艺，单体自产），质量认证（ISO 9001，ISO 13485医用级，FDA DMF，NADCAP航空航天级），研发和定制（定制MFR/结晶度/颜色，定制化合物，加工技术支持），供应链韧性（双源单体安排，能源供应稳定性，库存管理）。

应用场景和材料选择

航空航天：PEEK+30% CF复合材料用于飞机内饰部件、夹子和支架。减重：比铝轻50–60%。

医疗：医疗级PEEK（ISO 10993，USP Class VI）用于脊柱融合器、创伤板和牙科植入物。生物相容，X射线可透。

汽车：PEEK用于高温汽车部件：变速箱轴承、节气门体、传感器外壳。连续使用温度180–220°C。

2026年PEEK采购策略

至少认证两家供应商——10,000吨/年产能扩张显著，但新生产线需要6–12个月才能稳定。
协商年度框架协议并按季度调整价格的公式——原材料和能源成本波动。
要求每批次的力学性能数据——来料QC应验证MFR、Tg、Tm和力学性能。
计划4–8周的交货期——PEEK不是现货。定制化合物和形状增加2–4周。
考虑总拥有成本，而不仅仅是单价——PEEK加工废料率可能为3–10%。
审核供应商的聚合工艺和质量控制体系——PEEK质量始于单体纯度和聚合控制。

结论

PEEK制造商中国10000吨产能扩张2026代表了一次十年一遇的机会，使您的PEEK供应基础多元化，超越欧洲供应商（Victrex、Evonik），并确保25–35%的成本节约。在2026年认证中国PEEK供应商的最佳时机。

2026年5月20日

PEEK Manufacturer China 10000 Ton Capacity Expansion 2026: Procurement Guide

What Is PEEK and Why the 10000 Ton Capacity Expansion Matters

PEEK is a high-performance thermoplastic in the polyaryletherketone (PAEK) family. Key properties:

Continuous service temperature: 250°C (short-term up to 300°C)
Tensile strength: 90–110 MPa
Flexural modulus: 3.8–4.2 GPa
Chemical resistance: Resists acids, alkalis, organic solvents, and hydrocarbons
Biocompatibility: USP Class VI, ISO 10993 certified (for medical grades)
Flame retardancy: UL 94 V-0 (without additives)
Radiation resistance: >1,000 kGy (suitable for sterilization)

The PEEK manufacturer China 10000 ton capacity expansion 2026 refers to multiple Chinese PEEK producers expanding capacity simultaneously:

Jilin Join Dreamer New Material: Expanding from 2,000 t/y to 5,000 t/y (Q2 2026)
Shanghai Junfeng Synthetic Resin: New 3,000 t/y line operational (Q1 2026)
Zhejiang B&F Group: Expanding from 1,500 t/y to 4,000 t/y (Q3 2026)
Sichuan Emagic New Material: New 2,000 t/y line (Q4 2026)

Total new capacity: ~10,000 t/y. This will reduce China’s PEEK import dependency from 65% (2023) to <30% (2027E).

PEEK Manufacturer China 10000 Ton Capacity Expansion 2026: Price Landscape

Product Form	Grade	Price (USD/kg)	MOQ (kg)	Lead Time
Virgin PEEK pellet	Injection molding	$48–$72	100	2–3 weeks
Virgin PEEK pellet	Extrusion	$52–$78	100	2–3 weeks
Recycled PEEK pellet	Industrial grade	$28–$45	200	2–4 weeks
PEEK powder	Coating/SLS 3D printing	$85–$140/kg	50	3–4 weeks
PEEK sheet/plate	10–100 mm thick	$120–$220/kg	20 kg	4–6 weeks
PEEK rod/tube	Diameter 6–200 mm	$150–$300/kg	10 kg	4–8 weeks
PEEK-CF composite	30% carbon fiber	$95–$155/kg	50	6–8 weeks

Key Specifications and Quality Requirements

When sourcing from a PEEK manufacturer China 10000 ton capacity expansion 2026 supplier, these specifications are critical:

Melt flow rate (MFR): 8–25 g/10 min (ASTM D1238, 380°C/5 kg) — critical for injection molding
Crystallinity: 30–40% (DSC method) — affects mechanical properties and chemical resistance
Glass transition temperature (Tg): 143°C (DSC)
Melting temperature (Tm): 343°C (DSC)
Ash content: <0.1% (indicates filler/contamination)
Moisture content: <0.05% (critical for processing)
Batch-to-batch consistency: MFR CV <8%, color ∆E <1.0
CoA per batch: MFR, Tg, Tm, ash content, moisture content, mechanical properties (tensile, flexural)

How to Evaluate a PEEK Manufacturer China 10000 Ton Capacity Expansion 2026 Supplier

1. Production Scale and Capacity

Annual capacity >2,000 t/y indicates stable supply (not pilot line)
Continuous polymerization process (vs. batch) ensures consistency
Monomer (4,4′-difluorobenzophenone, hydroquinone) self-production reduces supply risk

2. Quality Certifications

ISO 9001:2015 minimum; ISO 13485 for medical grades
FDA DMF (Drug Master File) or medical device certification (for medical grades)
NADCAP or aerospace qualification (for aerospace grades)
Customer-specific qualifications: COMAC, Airbus, Boeing material approval

3. R&D and Customization

Can they tailor MFR, crystallinity, or color to your specs?
Do they offer custom compounds (PEEK+PTFE, PEEK+CF, PEEK+GF)?
Do they provide technical support for processing (injection molding, extrusion, 3D printing)?

4. Supply Chain Resilience

Dual-source monomer arrangement (4,4′-difluorobenzophenone supply disruption is a key risk)
Energy supply stability (PEEK polymerization is energy-intensive)
Inventory management: Can they hold 1–2 months of buffer stock at your facility?

Application Scenarios and Material Selection

Aerospace (Lightweight Replacement for Metal)

Medical (Implantable Devices)

Automotive (EV and Premium)

Industrial (Chemical Processing)

Procurement Strategy for PEEK in 2026

Qualify at least two suppliers: The 10,000 t/y capacity expansion is significant, but new production lines take 6–12 months to stabilize. A dual-source strategy mitigates supply risk from process variations, equipment failure, or energy restrictions.
Negotiate annual framework with price adjustment formula: Raw material (4,4′-difluorobenzophenone, hydroquinone) and energy costs fluctuate. Link pricing to published indices with quarterly adjustment.
Request mechanical property data for each batch: PEEK is a high-performance material—incoming QC should verify MFR, Tg, Tm, and mechanical properties. Require CoA with each shipment.
Plan for 4–8 week lead time: PEEK is not off-the-shelf. Custom compounds and shapes add 2–4 weeks. Place orders 3–4 months before production start.
Consider total cost of ownership, not just unit price: PEEK scrap rate in processing (injection molding, extrusion) can be 3–10%. A supplier with better batch consistency and technical support reduces scrap and rework costs.
Audit the supplier’s polymerization process and quality control system: PEEK quality starts with monomer purity and polymerization control. Visit the supplier’s production site to audit their process control system and QC lab capabilities.

Top PEEK Manufacturing Regions in China

Jilin Province (Jilin City): Home to Jilin Join Dreamer (2,000 t/y expanding to 5,000 t/y). Traditional chemical base with strong monomer supply chain. Best for virgin PEEK pellet.
Shanghai (Jinshan, Fengxian): Home to Shanghai Junfeng (3,000 t/y new line). Proximity to downstream compounders and 3D printing material suppliers. Best for custom compounds and powder.
Zhejiang Province (Hangzhou, Ningbo): Home to Zhejiang B&F Group (expanding to 4,000 t/y). Strong in medical and aerospace grades. Best for medical-grade and aerospace-grade PEEK.

Conclusion: Leveraging the 10000 Ton Capacity Expansion in 2026

2026年5月20日